What Factors Affect Cutting Speed and Quality in EPS Cutter Machines

EPS cutter machine, also recognized as foam cutting machine, is suitable for cutting expansible polystyrene foam or EPE expandable polythene. There are many factors that can affect how fast the cutting happens, as well as the smoothness or cleanliness of the cuts when using these machines. Some parts of the machine, the settings used, even down to what type of foam are all factors.  

EPS Cutter Machines For Wholesale Purchasers

There are many things that determine the cutting speed in EPS cutter machines and wholesale buyers need to be very careful while choosing a machine. One major factor is the strength of the heating wire or blade inside the machine. If the wire is too low of a gauge, it won’t cut as fast since it has to melt its way through the foam. But in heat that’s too hot, it may burn, or have rough edges. But you definitely want to have the proper amount of heat, because you don’t want to be plowing and grinding through it. 

Where to Get Top-Notch EPS Cutter Machines in Bulk

As you would imagine, finding a good place to solely buy EPS cutter is going to be tough but it’s very important for businesses that need multiple machines at the same time. Wholesale buyers look for polystyrene recycling machine are long-lasting, cut well and do it quickly. That is why you want to find a trusted manufacturer like zhongji. We have already gained a good name for producing machines which answer to these requirements. A good hint of quality is how long a machine goes without breaking.  

How Material Density Affect the Cut with EPS Cutting Machines

When using an EPS cutter makes a big difference in how fast and how well the EPP molding machine will cut your foam. There are different densities of EPS, so the foam can be soft and light or hard and thick. If the foam is really soft and light, it's going to slice through a lot faster because there isn't as much resistance.  

Cutting Quality with Wholesale EPS Cutter Machines

Cut quality is critical when processing EPS foam as it determines how good the finished product looks and fits. However, with wholesale EPS batch pre expander machine are more likely to experience the following common problems than not that will result in cutting is less than perfect. The major one is uneven or jagged edges. This may occur if the cutting wire is not properly taut, or when temperature has not been appropriately established.  

Adjusting Temperature and Wire Tension For Optimal EPS Cutting

It is well known that adjusting the temperature the wire tension is very important for get good cut with Zhongji EPS cutter machine. The cutting wire heats up to cut through the foam if set at too low of a temperature, it won't be heated properly and can tear instead of cut the foam.